ColecoVision & ADAM Computer Forum

I’m sharing the first SuperADAM build of 2026 here for everyone to see the process of what goes into building a Lundy Electronics SuperADAM console.

The first three consoles in this batch will have the rarer dark beige bottoms and will include a free I/O Expansion Hub. All consoles come with a professionally printed metalized vinyl decal on the front panel for branding and showing a Lundy Electronics authentic SuperADAM.

Lundy Electronics exclusive products included (subject to change):

Internal ADE Pro drive emulator
- Emulates up to four disk drives
- Compatible with floppy disk images (.dsk), most digital data pack images (.ddp), Colecovision cartridge ROM (.rom or col) images 32K in size or smaller.
https://lundyelectronics.com/product/co ... l-ade-pro/

SD DDP Data Drive emulator
- Data Drive emulator with 100% compatibility
https://lundyelectronics.com/product/co ... or-sd-ddp/

MIB238-WiFi
- integrated WiFi modem for up to 19.2k baud
- Terminal port for external 80 column support
- Parallel port for printer
- Boot PROM socket
- Memory expander signal for memory expander cards over 64K
- Terminal cable
- Parallel cable
https://lundyelectronics.com/product/co ... wifi-card/

1MB RAM Expander board
https://lundyelectronics.com/product/co ... -expander/

ADAMnet Power Inlet Board for Internal Power Supply Adapter
- Provides an Internal ADAMnet connector for internal expansions
- Provides an ADAMnet reset silence jumper for the ability to stop annoying printer reset
- Configure +5 out to DB-9 for use with Roller Controller power adapter or Coleco printer use only
https://lundyelectronics.com/product/co ... er-supply/

ADAM console replacement bottom rubber feet
https://lundyelectronics.com/product/co ... bber-feet/

Gamma DRAM to SRAM Converter PCB
- Removes all eight DRAM and two multiplexer ICs and replaces them with a single modern SRAM chip
https://lundyelectronics.com/product/co ... r-upgrade/

Delta DRAM to SRAM Converter PCB
- All the original DRAM (VRAM) is removed and replaced with modern SRAM
https://lundyelectronics.com/product/co ... r-upgrade/

ADAM 8 BIOS Selector kit
- First BIOS mod offering all eight known BIOS images in one adapter without the need for case mounted switches or physical jumpers on the adapter PCB
- Special custom SuperADAM selector PCB only available for SuperADAM builds
https://lundyelectronics.com/product/co ... adam-bios/

External Data Drive Housing
- Physical Data Drive is removed from the console and housed in a Lundy Exclusive external housing, freeing up the space inside the console for modern SD drive emulator options.
- Custom breakout boards for converting both Data Drive molex connector signals to a single DB-26 style connector
- Professionally printed top label on smooth vinyl
https://www.thingiverse.com/thing:6926571

ADAM and ColecoVision I/O Expansion Hub (first three units only)
- Professional PCB layout to eliminate crosstalk and provide proper power requirements
- ENIG (gold) I/O edge card PCB fingers for durability and oxidation resistance
- Quality 3D-printed housing
- Two top expansion port covers to cover any unused top port(s)
https://lundyelectronics.com/product/co ... nsion-hub/

COM Panel
- Custom metal machined and powder coated COM panel bracket
- Serial terminal connector slot
- Parallel port connector slot
- External Data Drive connector slot

Various custom Lundy Electronics 3D printed parts
- Custom printed shroud surround with port labeling
- Power supply terminal cover
- Internal cable access hole surround
- Custom “SuperADAM” branded internal drive emulator brackets
- Beige ribbon cable interconnect guard (https://www.thingiverse.com/thing:7267682)

Other products included:

- Well established RT-50A Meanwell power supply
- Power inlet module
- Power switch

Behind the scenes stuff:

- Audio balance fix for I/O expansion addons that create audio like the SGM and Lundy Electronics Speech Synthesizer
- Custom case modifications/cuts
- PCBs are ultrasonically cleaned
- All new electrolytic and tantalum capacitors
- New cartridge connector
- New AV DIN connector and harness

Reworking the PCBs first

Case modifications/cuts

Building up the case and external DDD assembly

Installing boards. All hardware and metal RF tins get polished to a nice shine. This example already had some good looking RF tins and probably one of the best I've ever seen.

I wasn't happy with the final internal cable harness length for the external data drive and had to order more wire to make a little longer one. I'm in a holding pattern until then.

Everything is so clean and shiny! and I'm sure minty fresh.

I saw your Facebook post. My vote would definitely be to wait for HDMI!

After getting sidetracked for a few days, the PICO9918 is now installed. The default VGA dongle looks great, but that will be swapped for HDMI once the new HDMI dongles get here.